Fan2Mqtt and Mqtt2Fan monitor and controls wifi heat recovery devices with
the powerful MQTT protocol.
A protocol used by most automation systems on the market today.
Like for example. HomeSee Hs3, OpenHab , Home Assistant etc.
Compatible with Blauberg Expert Wifi, Vents Twinfresh Wifi and
Flexit Roomie One Wifi v.1 units.
We have ready monitor and control software to link these
fans up against a mqtt broker (server).
This means that they can be monitored and controlled individually or in groups from
any mqtt client with rights and access to the server.
The programs runs on a suitable PC, Mac or Linux device as
eg Raspberry Pi. A session must be connected per fan you wish to control.
The controller and fan should be in the same network, otherwise it must be routed so that
the controller reaches both the fan and the server.
The best solution is to have a controller for each wifi network.
The controller must be able to run Python ver 2 or 3 and must have
installed the MQTT library and the python-six library.
The Mqtt broker (server) can be local or public.
For example, I use a controller for wifi (raspberry Pi w / several mqtt2fan processes
controlled by pm2 (process manager).
In addition, I have a controller on a virtual Pi for office wifi and fans.
MQTT Broker (eg Mosquitto).
Raspberry Pi or other Linux controller, Mac or PC that can run Python.
One or more Blauberg Expert Wifi, Vents Twinfresh Wifi or
Flexit Roomie One Wifi units.
One license for each fan you wish to control.
If you buy one or more Blauberg Vento Expert Wifi units you get a 50% discount on the licenses! If you have purchased a license and want more, contact us and we will expand to two or more licenses. Its not possible to use two 1-license modules against one broker. Then you have to have a 1-license module and a 2-license module. etc.